Product Description
What is applications use gear motor?
Electric gear motors are used in various applications that require for high output torque and low output rotation speed.
What is gear motor?
Gear motor is combined electric motor with gear reducer box.
Would you like to be GPG motor wholesaler,dealer,distributor,stockist?
GPG motor can improve your business.
Taibang gear motor is ideal drive for all kinds of industrial automation products for both industrial and commercial application.
What you can be provided by us is steady quality products(quite and efficient performance gear motor) and engineering solution.
The main products is induction motor, reversible motor, DC brush gear motor, DC brushless gear motor, CH/CV medium gear motors, planetary gear motor,worm gear motor,right angle CHINAMFG and hollow shaft gear motor, etc, which used widely in various fields of manufacturing pipelining, transportation, food, medicine, printing, fabric, packing, office, apparatus, entertainment etc, and is the preferred and matched product for automatic machine.
1)The stator is made of high quality low carbon steel seamless steel tube and ferrite permanent magnet.
2)The rotor consists of silicon steel sheet,copper coil,commutator and insulating material,etc.
3)The rotor shaft is made of high performance medium carbon alloy steel and processed by special technics.There are round shaft and gear shaft.
4)The bearing and oil seal is selected from CHINAMFG brand to ensure good running performance and sealing effect.
5)The wire is made from high temperature resistant and flame retardant material.
Should you any questions,please feel free to contact Ms Susan Liu directly.
Please leave message or send inquiry.I will be back to you asap.
Model Instruction
| Model | Gear Head | Rated Power |
Voltage |
Ampere | Speed | Torque | Shell Diameter | Motor Height |
| W | V | A | r/min | mN.m | mm | 08 | ||
|
GDM08-SC |
4GN | 30 | 12 | 4.6 | 1500 | 190.9 | Φ69 | 105 |
| 1800 | 159.08 | |||||||
| 2200 | 130.2 | |||||||
| 24 | 2.1 | 1500 | 190.9 | |||||
| 1800 | 159.08 | |||||||
| 2200 | 130.2 |
| Reduction Ratio | L1 | L2 | L3 |
| 1:3~1:20 | 105mm | 32mm | 137mm |
| 1:25~1:300 | 105mm | 44mm | 149mm |
FAQ
Q: How about your company?
A:We are gear motor factory located in HangZhou city of China and established in 1995.We have more than 1200 workers.Our main product is AC micro gear motor 6W to 250W, AC small gear motor 100W to 3700W,brush DC motor 10W to 400W,brushless motor 10W to 750W,drum motor 60W to 3700W ,planetary gearbox , and worm gearbox,etc.
Q: How to choose a suitable motor?
A:If you have gear motor pictures or drawings to show us, or you tell us detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can suggest suitable motor per your request .
Q: Can you make the gear motor with customize specifications ?
Yes, we can customize per your request for the voltage, speed, torque and shaft size and shape. If you need additional wires or cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: What’s your lead time?
A: Usually our regular standard product will need 10-15days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
Q: What is your MOQ?
A: If delivery by sea ,the minimum order is 100 pieces, if deliver by express, there is no limit.
Q: Do you have the item in stock?
A: I am sorry we do not have the item in stock, All products are made with orders.
Q: How to contact us ?
A: You can send us enquiry .
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial, Household Appliances, Power Tools |
|---|---|
| Operating Speed: | Constant Speed |
| Excitation Mode: | Compound |
| Function: | Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
| Samples: |
US$ 27/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
How is the efficiency of a gear motor measured, and what factors can affect it?
The efficiency of a gear motor is a measure of how effectively it converts electrical input power into mechanical output power. It indicates the motor’s ability to minimize losses and maximize its energy conversion efficiency. The efficiency of a gear motor is typically measured using specific methods, and several factors can influence it. Here’s a detailed explanation:
Measuring Efficiency:
The efficiency of a gear motor is commonly measured by comparing the mechanical output power (Pout) to the electrical input power (Pin). The formula to calculate efficiency is:
Efficiency = (Pout / Pin) * 100%
The mechanical output power can be determined by measuring the torque (T) produced by the motor and the rotational speed (ω) at which it operates. The formula for mechanical power is:
Pout = T * ω
The electrical input power can be measured by monitoring the current (I) and voltage (V) supplied to the motor. The formula for electrical power is:
Pin = V * I
By substituting these values into the efficiency formula, the efficiency of the gear motor can be calculated as a percentage.
Factors Affecting Efficiency:
Several factors can influence the efficiency of a gear motor. Here are some notable factors:
- Friction and Mechanical Losses: Friction between moving parts, such as gears and bearings, can result in mechanical losses and reduce the overall efficiency of the gear motor. Minimizing friction through proper lubrication, high-quality components, and efficient design can help improve efficiency.
- Gearing Efficiency: The design and quality of the gears used in the gear motor can impact its efficiency. Gear trains can introduce mechanical losses due to gear meshing, misalignment, or backlash. Using well-designed gears with proper tooth profiles and minimizing gear train losses can improve efficiency.
- Motor Type and Construction: Different types of motors (e.g., brushed DC, brushless DC, AC induction) have varying efficiency characteristics. Motor construction, such as the quality of magnetic materials, winding resistance, and rotor design, can also affect efficiency. Choosing motors with higher efficiency ratings can improve overall gear motor efficiency.
- Electrical Losses: Electrical losses, such as resistive losses in motor windings or in the motor drive circuitry, can reduce efficiency. Minimizing resistance, optimizing motor drive electronics, and using efficient control algorithms can help mitigate electrical losses.
- Load Conditions: The operating conditions and load characteristics placed on the gear motor can impact its efficiency. Heavy loads, high speeds, or frequent acceleration and deceleration can increase losses and reduce efficiency. Matching the gear motor’s specifications to the application requirements and optimizing load conditions can improve efficiency.
- Temperature: Elevated temperatures can significantly affect the efficiency of a gear motor. Excessive heat can increase resistive losses, reduce lubrication effectiveness, and affect the magnetic properties of motor components. Proper cooling and thermal management techniques are essential to maintain optimal efficiency.
By considering these factors and implementing measures to minimize losses and optimize performance, the efficiency of a gear motor can be enhanced. Manufacturers often provide efficiency specifications for gear motors, allowing users to select motors that best meet their efficiency requirements for specific applications.
What are some common challenges or issues associated with gear motors, and how can they be addressed?
Gear motors, like any mechanical system, can face certain challenges or issues that may affect their performance, reliability, or longevity. However, many of these challenges can be addressed through proper design, maintenance, and operational practices. Here are some common challenges associated with gear motors and potential solutions:
1. Gear Wear and Failure:
Over time, gears in a gear motor can experience wear, resulting in decreased performance or even failure. The following measures can address this challenge:
- Proper Lubrication: Regular lubrication with the appropriate lubricant can minimize friction and wear between gear teeth. It is essential to follow manufacturer recommendations for lubrication intervals and use high-quality lubricants suitable for the specific gear motor.
- Maintenance and Inspection: Routine maintenance and periodic inspections can help identify early signs of gear wear or damage. Timely replacement of worn gears or components can prevent further damage and ensure the gear motor’s optimal performance.
- Material Selection: Choosing gears made from durable and wear-resistant materials, such as hardened steel or specialized alloys, can increase their lifespan and resistance to wear.
2. Backlash and Inaccuracy:
Backlash, as discussed earlier, can introduce inaccuracies in gear motor systems. The following approaches can help address this issue:
- Anti-Backlash Gears: Using anti-backlash gears, which are designed to minimize or eliminate backlash, can significantly reduce inaccuracies caused by gear play.
- Tight Manufacturing Tolerances: Ensuring precise manufacturing tolerances during gear production helps minimize backlash and improve overall accuracy.
- Backlash Compensation: Implementing control algorithms or mechanisms to compensate for backlash can help mitigate its effects and improve the accuracy of the gear motor.
3. Noise and Vibrations:
Gear motors can generate noise and vibrations during operation, which may be undesirable in certain applications. The following strategies can help mitigate this challenge:
- Noise Dampening: Incorporating noise-dampening features, such as vibration-absorbing materials or isolation mounts, can reduce noise and vibrations transmitted from the gear motor to the surrounding environment.
- Quality Gears and Bearings: Using high-quality gears and bearings can minimize vibrations and noise generation. Precision-machined gears and well-maintained bearings help ensure smooth operation and reduce unwanted noise.
- Proper Alignment: Ensuring accurate alignment of gears, shafts, and other components reduces the likelihood of noise and vibrations caused by misalignment. Regular inspections and adjustments can help maintain optimal alignment.
4. Overheating and Thermal Management:
Heat buildup can be a challenge in gear motors, especially during prolonged or heavy-duty operation. Effective thermal management techniques can address this issue:
- Adequate Ventilation: Providing proper ventilation and airflow around the gear motor helps dissipate heat. This can involve designing cooling fins, incorporating fans or blowers, or ensuring sufficient clearance for air circulation.
- Heat Dissipation Materials: Using heat-dissipating materials, such as aluminum or copper, in motor housings or heat sinks can improve heat dissipation and prevent overheating.
- Monitoring and Control: Implementing temperature sensors and thermal protection mechanisms allows for real-time monitoring of the gear motor’s temperature. If the temperature exceeds safe limits, the motor can be automatically shut down or adjusted to prevent damage.
5. Load Variations and Shock Loads:
Unexpected load variations or shock loads can impact the performance and durability of gear motors. The following measures can help address this challenge:
- Proper Sizing and Selection: Choosing gear motors with appropriate torque and load capacity ratings for the intended application helps ensure they can handle expected load variations and occasional shock loads without exceeding their limits.
- Shock Absorption: Incorporating shock-absorbing mechanisms, such as dampers or resilient couplings, can help mitigate the effects of sudden load changes or impacts on the gear motor.
- Load Monitoring: Implementing load monitoring systems or sensors allows for real-time monitoring of load variations. This information can be used to adjust operation or trigger protective measures when necessary.
By addressing these common challenges associated with gear motors through appropriate design considerations, regular maintenance, and operational practices, it is possible to enhance their performance, reliability, and longevity.
How does the gearing mechanism in a gear motor contribute to torque and speed control?
The gearing mechanism in a gear motor plays a crucial role in controlling torque and speed. By utilizing different gear ratios and configurations, the gearing mechanism allows for precise manipulation of these parameters. Here’s a detailed explanation of how the gearing mechanism contributes to torque and speed control in a gear motor:
The gearing mechanism consists of multiple gears with varying sizes, tooth configurations, and arrangements. Each gear in the system engages with another gear, creating a mechanical connection. When the motor rotates, it drives the rotation of the first gear, which then transfers the motion to subsequent gears, ultimately resulting in the output shaft’s rotation.
Torque Control:
The gearing mechanism in a gear motor enables torque control through the principle of mechanical advantage. The gear system utilizes gears with different numbers of teeth, known as gear ratio, to adjust the torque output. When a smaller gear (pinion) engages with a larger gear (gear), the pinion rotates faster than the gear but exerts more force or torque. This results in torque amplification, allowing the gear motor to deliver higher torque at the output shaft while reducing the rotational speed. Conversely, if a larger gear engages with a smaller gear, torque reduction occurs, resulting in higher rotational speed at the output shaft.
By selecting the appropriate gear ratio, the gearing mechanism effectively adjusts the torque output of the gear motor to match the requirements of the application. This torque control capability is essential in applications that demand high torque for heavy lifting or overcoming resistance, as well as applications that require lower torque but higher rotational speed.
Speed Control:
The gearing mechanism also contributes to speed control in a gear motor. The gear ratio determines the relationship between the rotational speed of the input shaft (driven by the motor) and the output shaft. When a gear motor has a higher gear ratio (more teeth on the driven gear compared to the driving gear), it reduces the output speed while increasing the torque. Conversely, a lower gear ratio increases the output speed while reducing the torque.
By choosing the appropriate gear ratio, the gearing mechanism allows for precise speed control in a gear motor. This is particularly useful in applications that require specific speed ranges or variations, such as conveyor systems, robotic movements, or machinery that needs to operate at different speeds for different tasks. The speed control capability of the gearing mechanism enables the gear motor to match the desired speed requirements of the application accurately.
In summary, the gearing mechanism in a gear motor contributes to torque and speed control by utilizing different gear ratios and configurations. It enables torque amplification or reduction, depending on the gear arrangement, allowing the gear motor to deliver the required torque output. Additionally, the gear ratio also determines the relationship between the rotational speed of the input and output shafts, providing precise speed control. These torque and speed control capabilities make gear motors versatile and suitable for a wide range of applications in various industries.
editor by CX 2024-05-15
China Standard Low Speed 0.8rpm 52mm Micro Planetary Electric Gear Motor for Solar Tracker vacuum pump booster
Product Description
low speed 0.8rpm 52mm micro planetary electric gear motor solar tracker
1. Features of PG52ZY52
Voltage: 12V 24V
Current: 13.8-21.1A
Speed: 0.8-1000rpm
Torque: 30-150kgf.cm
Typical applications: Pan/tilt camera, grill, oven, cleaning machine, garbage disposers, coffee machine, infusion pumps, office equipment, household appliances, automatic actuator.
2. Specifications of PG52ZY52
Note: It’s the typical specificaitoin for reference only, We can choose DC motor with different voltage speed to meet your torque and speed requirement.
Company Profile
1. About us
Business Type: Manufacturer, Trading Company Verified
Location: ZHangZhoug, China (Mainland) Verified
Main Products: dc motor,ac motor,gear motor,stepper motor,brushless motor
Total Employees: 51 – 100 People
Total Annual Revenue: $5 Million – $10 Million
Year Established: 2014 Verified
Top 3 Markets: Western Europe 20.00% North America 15.00% Domestic Market 12.00%
Product Certifications : CE, RoSH, RoSH CE
Trademarks : CHINAMFG
2. Production
1)Production line
2) Product components
Packing&Delivery
Certifications
Customer Visits
FAQ
Q: What’s your main products?
A:We currently produce Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.
Q:How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed life time and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.
Q: Do you have customized service for your standard motors?
A:Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: you have individual design service for motors?
A:Yes, we would like to design motors individually for our customers, but it may need some mould charge and design charge.
Q:Can I have samples for testing first?
A:Yes, definitely you can. After confirmed the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.
Q:How do you make sure motor quality?
A:We have our own inspection procedures: for incoming materials, we have signed sample and drawing to make sure qualified incoming materials; for production process, we have tour inspection in the process and final inspection to make sure qualified products before shipping.
Q:What’s your lead time?
A:Generally speaking, our regular standard product will need 25-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depends on the specific orders
Q:What’s your payment term?
A:For all our new customers, we will need 40% deposite, 60% paid before shipment.
Q:When will you reply after got my inquiries?
A:We will response within 24 hours once get your inquires.
Q:How can I trust you to make sure my money is safe?
A:We are certified by the third party SGS and we have exported to over 85 countries up to June.2017. You can check our reputation with our current customers in your country (if our customers do not mind), or you can order via alibaba to get trade assurance from alibaba to make sure your money is safe.
Q:What’s the minimum order quantity?
A:Our minimum order quantity depends on different motor models, please email us to check. Also, we usually do not accept personal use motor orders.
Q:What’s your shipping method for motors?
A:For samples and packages less than 100kg, we usually suggest express shipping; For heavy packages, we usually suggest air shipping or sea shipping. But it all depends on our customers’ needs.
Q:What certifications do you have?
A:We currently have CE and ROSH certifications.
Q:Can you send me your price list?
A:Since we have hundreds of different products, and price varies per different specifications, we are not able to offer a price list. But we can quote within 24 hours once got your inquirues to make sure you can get the price in time.
Q:Can I visit your company?
A:Yes, welcome to visit our company, but please let us know at least 2 weeks in advance to help us make sure no other meetings during the day you visit us. Thanks!
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Household Appliances, Auto Shutter, Pan/Tilt Camera, Slot Machine |
|---|---|
| Operating Speed: | Low Speed |
| Function: | Driving |
| Casing Protection: | Drip-Proof |
| Structure and Working Principle: | Brush |
| Certification: | Ce, RoHS |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
What are the maintenance requirements for gear motors, and how can longevity be maximized?
Gear motors, like any mechanical system, require regular maintenance to ensure optimal performance and longevity. Proper maintenance practices help prevent failures, minimize downtime, and extend the lifespan of gear motors. Here are some maintenance requirements for gear motors and ways to maximize their longevity:
1. Lubrication:
Regular lubrication is essential for gear motors to reduce friction, wear, and heat generation. The gears, bearings, and other moving parts should be properly lubricated according to the manufacturer’s recommendations. Lubricants should be selected based on the motor’s specifications and operating conditions. Regular inspection and replenishment of lubricants, as well as periodic oil or grease changes, should be performed to maintain optimal lubrication levels and ensure long-lasting performance.
2. Inspection and Cleaning:
Regular inspection and cleaning of gear motors are crucial for identifying any signs of wear, damage, or contamination. Inspecting the gears, bearings, shafts, and connections can help detect any abnormalities or misalignments. Cleaning the motor’s exterior and ventilation channels to remove dust, debris, or moisture buildup is also important in preventing malfunctions and maintaining proper cooling. Any loose or damaged components should be repaired or replaced promptly.
3. Temperature and Environmental Considerations:
Monitoring and controlling the temperature and environmental conditions surrounding gear motors can significantly impact their longevity. Excessive heat can degrade lubricants, damage insulation, and lead to premature component failure. Ensuring proper ventilation, heat dissipation, and avoiding overloading the motor can help manage temperature effectively. Similarly, protecting gear motors from moisture, dust, chemicals, and other environmental contaminants is vital to prevent corrosion and damage.
4. Load Monitoring and Optimization:
Monitoring and optimizing the load placed on gear motors can contribute to their longevity. Operating gear motors within their specified load and speed ranges helps prevent excessive stress, overheating, and premature wear. Avoiding sudden and frequent acceleration or deceleration, as well as preventing overloading or continuous operation near the motor’s maximum capacity, can extend its lifespan.
5. Alignment and Vibration Analysis:
Proper alignment of gear motor components, such as gears, couplings, and shafts, is crucial for smooth and efficient operation. Misalignment can lead to increased friction, noise, and premature wear. Regularly checking and adjusting alignment, as well as performing vibration analysis, can help identify any misalignment or excessive vibration that may indicate underlying issues. Addressing alignment and vibration problems promptly can prevent further damage and maximize the motor’s longevity.
6. Preventive Maintenance and Regular Inspections:
Implementing a preventive maintenance program is essential for gear motors. This includes establishing a schedule for routine inspections, lubrication, and cleaning, as well as conducting periodic performance tests and measurements. Following the manufacturer’s guidelines and recommendations for maintenance tasks, such as belt tension checks, bearing replacements, or gear inspections, can help identify and address potential issues before they escalate into major failures.
By adhering to these maintenance requirements and best practices, the longevity of gear motors can be maximized. Regular maintenance, proper lubrication, load optimization, temperature control, and timely repairs or replacements of worn components contribute to the reliable operation and extended lifespan of gear motors.
How do gear motors compare to other types of motors in terms of power and efficiency?
Gear motors can be compared to other types of motors in terms of power output and efficiency. The choice of motor type depends on the specific application requirements, including the desired power level, efficiency, speed range, torque characteristics, and control capabilities. Here’s a detailed explanation of how gear motors compare to other types of motors in terms of power and efficiency:
1. Gear Motors:
Gear motors combine a motor with a gear mechanism to deliver increased torque output and improved control. The gear reduction enables gear motors to provide higher torque while reducing the output speed. This makes gear motors suitable for applications that require high torque, precise positioning, and controlled movements. However, the gear reduction process introduces mechanical losses, which can slightly reduce the overall efficiency of the system compared to direct-drive motors. The efficiency of gear motors can vary depending on factors such as gear quality, lubrication, and maintenance.
2. Direct-Drive Motors:
Direct-drive motors, also known as gearless or integrated motors, do not use a gear mechanism. They provide a direct connection between the motor and the load, eliminating the need for gear reduction. Direct-drive motors offer advantages such as high efficiency, low maintenance, and compact design. Since there are no gears involved, direct-drive motors experience fewer mechanical losses and can achieve higher overall efficiency compared to gear motors. However, direct-drive motors may have limitations in terms of torque output and speed range, and they may require more complex control systems to achieve precise positioning.
3. Stepper Motors:
Stepper motors are a type of gear motor that excels in precise positioning applications. They operate by converting electrical pulses into incremental steps of movement. Stepper motors offer excellent positional accuracy and control. They are capable of precise positioning and can hold a position without power. Stepper motors have relatively high torque at low speeds, making them suitable for applications that require precise control and positioning, such as robotics, 3D printers, and CNC machines. However, stepper motors may have lower overall efficiency compared to direct-drive motors due to the additional power required to overcome the detents between steps.
4. Servo Motors:
Servo motors are another type of gear motor known for their high torque, high speed, and excellent positional accuracy. Servo motors combine a motor, a feedback device (such as an encoder), and a closed-loop control system. They offer precise control over position, speed, and torque. Servo motors are widely used in applications that require accurate and responsive positioning, such as industrial automation, robotics, and camera pan-tilt systems. Servo motors can achieve high efficiency when properly optimized and controlled but may have slightly lower efficiency compared to direct-drive motors due to the additional complexity of the control system.
5. Efficiency Considerations:
When comparing power and efficiency among different motor types, it’s important to consider the specific requirements and operating conditions of the application. Factors such as load characteristics, speed range, duty cycle, and control requirements influence the overall efficiency of the motor system. While direct-drive motors generally offer higher efficiency due to the absence of mechanical losses from gears, gear motors can deliver higher torque output and enhanced control capabilities. The efficiency of gear motors can be optimized through proper gear selection, lubrication, and maintenance practices.
In summary, gear motors offer increased torque and improved control compared to direct-drive motors. However, gear reduction introduces mechanical losses that can slightly impact the overall efficiency of the system. Direct-drive motors, on the other hand, provide high efficiency and compact design but may have limitations in terms of torque and speed range. Stepper motors and servo motors, both types of gear motors, excel in precise positioning applications but may have slightly lower efficiency compared to direct-drive motors. The selection of the most suitable motor type depends on the specific requirements of the application, balancing power, efficiency, speed range, and control capabilities.
In which industries are gear motors commonly used, and what are their primary applications?
Gear motors find widespread use in various industries due to their versatility, reliability, and ability to provide controlled mechanical power. They are employed in a wide range of applications that require precise power transmission and speed control. Here’s a detailed explanation of the industries where gear motors are commonly used and their primary applications:
1. Robotics and Automation:
Gear motors play a crucial role in robotics and automation industries. They are used in robotic arms, conveyor systems, automated assembly lines, and other robotic applications. Gear motors provide the required torque, speed control, and directional control necessary for the precise movements and operations of robots. They enable accurate positioning, gripping, and manipulation tasks in industrial and commercial automation settings.
2. Automotive Industry:
The automotive industry extensively utilizes gear motors in various applications. They are used in power windows, windshield wipers, HVAC systems, seat adjustment mechanisms, and many other automotive components. Gear motors provide the necessary torque and speed control for these systems, enabling smooth and efficient operation. Additionally, gear motors are also utilized in electric and hybrid vehicles for powertrain applications.
3. Manufacturing and Machinery:
Gear motors find wide application in the manufacturing and machinery sector. They are used in conveyor belts, packaging equipment, material handling systems, industrial mixers, and other machinery. Gear motors provide reliable power transmission, precise speed control, and torque amplification, ensuring efficient and synchronized operation of various manufacturing processes and machinery.
4. HVAC and Building Systems:
In heating, ventilation, and air conditioning (HVAC) systems, gear motors are commonly used in damper actuators, control valves, and fan systems. They enable precise control of airflow, temperature, and pressure, contributing to energy efficiency and comfort in buildings. Gear motors also find applications in automatic doors, blinds, and gate systems, providing reliable and controlled movement.
5. Marine and Offshore Industry:
Gear motors are extensively used in the marine and offshore industry, particularly in propulsion systems, winches, and cranes. They provide the required torque and speed control for various marine operations, including steering, anchor handling, cargo handling, and positioning equipment. Gear motors in marine applications are designed to withstand harsh environments and provide reliable performance under demanding conditions.
6. Renewable Energy Systems:
The renewable energy sector, including wind turbines and solar tracking systems, relies on gear motors for efficient power generation. Gear motors are used to adjust the rotor angle and position in wind turbines, optimizing their performance in different wind conditions. In solar tracking systems, gear motors enable the precise movement and alignment of solar panels to maximize sunlight capture and energy production.
7. Medical and Healthcare:
Gear motors have applications in the medical and healthcare industry, including in medical equipment, laboratory devices, and patient care systems. They are used in devices such as infusion pumps, ventilators, surgical robots, and diagnostic equipment. Gear motors provide precise control and smooth operation, ensuring accurate dosing, controlled movements, and reliable functionality in critical medical applications.
These are just a few examples of the industries where gear motors are commonly used. Their versatility and ability to provide controlled mechanical power make them indispensable in numerous applications requiring torque amplification, speed control, directional control, and load distribution. The reliable and efficient power transmission offered by gear motors contributes to the smooth and precise operation of machinery and systems in various industries.
editor by CX 2024-04-24
China manufacturer Long Life Solar Panel DC Gear Motor Electric vacuum pump oil
Product Description
General Information
- DC brushed commutation
- Rotation: CW from shaft extension
- Protection class: IP65
- CE certified structure
Specifications
| MODEL/ SG080GB | TOL | UNIT | VALUE |
| Supply Voltage | NOM. | Vdc | 24 |
| No-load Speed | ±10% | rpm | 1.5 |
| No-load Current | MAX | A | 1 |
| Rated Torque | NOM. | Nm | 300 |
| Rated Speed | ±10% | rpm | 1.3 |
| Rated Current | MAX | A | 5 |
| Peak Torque | MAX | Nm | 410 |
Mechanical
Special shaft and other mechanical characteristic are optional.
Packaging & Shipping
1, Waterproof plastic bag packed in foam box and carton as outer packing.
2, Export wooden box packaging for products.
Company Profile
- Originally motor division of CHINAMFG HangZhou- China National Machinery & Equipment Imp & Exp HangZhou Co.,Ltd., 1 of TOP 20 stated owned Machinery Group
- Privately owned Ltd company since 2000: HangZhou CHINAMFG Automation Technology Co. Ltd.
- Exmek Electric —Registered Brand Name
- Business: Design and manufacture of motion control products and components
- Highly qualified personnel
- UL, CE, RoHS certification
- ISO 9001, ISO 14000
Company Capabilities
- Modern Motor Design and Manufacture
- Part Set Design and Manufacture
- Magnetic Design Software-Motorsolver
- Molding
- Shipping world wide
Why CHINAMFG Electric
- Open for general discussion and questions
- Time to market or theatre of operations can be substantially reduced
- Talented team of engineers providing innovative technical solutions
- One stop “supplier” and complete sub-system
- Quality products provided at competitive low cost
- Ability to ship world wide
- On time delivery
- Training at Customer locations
- Fast service on return and repair results
- Many repeated customers
Applications:
Use for swimming pool, automotive, semiconductor, chemical & medical, industrial automation, power tool, instrument, measuring equipment, office automation, various OEM application.
We are open for general discussion and questions. Contact us now!
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Universal, Industrial, Household Appliances, Car, Power Tools |
|---|---|
| Operating Speed: | Adjust Speed |
| Excitation Mode: | Excited |
| Function: | Driving |
| Casing Protection: | Closed Type |
| Number of Poles: | 2 |
| Samples: |
US$ 160/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Where can individuals find reliable resources for learning more about gear motors and their applications?
Individuals seeking to learn more about gear motors and their applications have access to various reliable resources that provide valuable information and insights. Here are some sources where individuals can find reliable information about gear motors:
1. Manufacturer Websites:
Manufacturer websites are a primary source of information about gear motors. Gear motor manufacturers often provide detailed product specifications, application guides, technical documentation, and educational materials on their websites. These resources offer insights into different gear motor types, features, performance characteristics, and application considerations. Manufacturer websites are a reliable and convenient starting point for learning about gear motors.
2. Industry Associations and Organizations:
Industry associations and organizations related to mechanical engineering, automation, and motion control often have resources and publications dedicated to gear motors. These organizations provide technical articles, whitepapers, industry standards, and guidelines related to gear motor design, selection, and application. Examples of such associations include the American Gear Manufacturers Association (AGMA), International Electrotechnical Commission (IEC), and Institute of Electrical and Electronics Engineers (IEEE).
3. Technical Publications and Journals:
Technical publications and journals focused on engineering, robotics, and motion control are valuable sources of in-depth knowledge about gear motors. Publications like IEEE Transactions on Industrial Electronics, Mechanical Engineering magazine, or Motion System Design magazine often feature articles, case studies, and research papers on gear motor technology, advancements, and applications. These publications provide authoritative and up-to-date information from industry experts and researchers.
4. Online Forums and Communities:
Online forums and communities dedicated to engineering, robotics, and automation can be excellent resources for discussions, insights, and practical experiences related to gear motors. Websites like Stack Exchange, engineering-focused subreddits, or specialized forums provide platforms for individuals to ask questions, share knowledge, and engage in discussions with professionals and enthusiasts in the field. Participating in these communities allows individuals to learn from real-world experiences and gain practical insights.
5. Educational Institutions and Courses:
Technical colleges, universities, and vocational training centers often offer courses or programs in mechanical engineering, mechatronics, or automation that cover gear motor fundamentals and applications. These educational institutions provide comprehensive curricula, textbooks, and lecture materials that can serve as reliable resources for individuals interested in learning about gear motors. Additionally, online learning platforms like Coursera, Udemy, or LinkedIn Learning offer courses on topics related to gear motors and motion control.
6. Trade Shows and Exhibitions:
Attending trade shows, exhibitions, and industry conferences related to automation, robotics, or motion control provides opportunities to learn about the latest advancements in gear motor technology. These events often feature product demonstrations, technical presentations, and expert panels where individuals can interact with gear motor manufacturers, industry experts, and other professionals. It’s a great way to stay updated on the latest trends, innovations, and applications of gear motors.
When seeking reliable resources, it’s important to consider the credibility of the source, the expertise of the authors, and the relevance to the specific area of interest. By leveraging these resources, individuals can gain a comprehensive understanding of gear motors and their applications, from basic principles to advanced topics, enabling them to make informed decisions and effectively utilize gear motors in their projects or applications.
What is the significance of gear reduction in gear motors, and how does it affect efficiency?
Gear reduction plays a significant role in gear motors as it enables the motor to deliver higher torque while reducing the output speed. This feature has several important implications for gear motors, including enhanced power transmission, improved control, and potential trade-offs in terms of efficiency. Here’s a detailed explanation of the significance of gear reduction in gear motors and its effect on efficiency:
Significance of Gear Reduction:
1. Increased Torque: Gear reduction allows gear motors to generate higher torque output compared to a motor without gears. By reducing the rotational speed at the output shaft, gear reduction increases the mechanical advantage of the system. This increased torque is beneficial in applications that require high torque to overcome resistance, such as lifting heavy loads or driving machinery with high inertia.
2. Improved Control: Gear reduction enhances the control and precision of gear motors. By reducing the speed, gear reduction allows for finer control over the motor’s rotational movement. This is particularly important in applications that require precise positioning or accurate speed control. The gear reduction mechanism enables gear motors to achieve smoother and more controlled movements, reducing the risk of overshooting or undershooting the desired position.
3. Load Matching: Gear reduction helps match the motor’s power characteristics to the load requirements. Different applications have varying torque and speed requirements. Gear reduction allows the gear motor to achieve a better match between the motor’s power output and the specific requirements of the load. It enables the motor to operate closer to its peak efficiency by optimizing the torque-speed trade-off.
Effect on Efficiency:
While gear reduction offers several advantages, it can also affect the efficiency of gear motors. Here’s how gear reduction impacts efficiency:
1. Mechanical Efficiency: The gear reduction process introduces mechanical components such as gears, bearings, and lubrication systems. These components introduce additional friction and mechanical losses into the system. As a result, some energy is lost in the form of heat during the gear reduction process. The efficiency of the gear motor is influenced by the quality of the gears, the lubrication used, and the overall design of the gear system. Well-designed and properly maintained gear systems can minimize these losses and optimize mechanical efficiency.
2. System Efficiency: Gear reduction affects the overall system efficiency by impacting the motor’s electrical efficiency. In gear motors, the motor typically operates at higher speeds and lower torques compared to a direct-drive motor. The overall system efficiency takes into account both the electrical efficiency of the motor and the mechanical efficiency of the gear system. While gear reduction can increase the torque output, it also introduces additional losses due to increased mechanical complexity. Therefore, the overall system efficiency may be lower compared to a direct-drive motor for certain applications.
It’s important to note that the efficiency of gear motors is influenced by various factors beyond gear reduction, such as motor design, control systems, and operating conditions. The selection of high-quality gears, proper lubrication, and regular maintenance can help minimize losses and improve efficiency. Additionally, advancements in gear technology, such as the use of precision gears and improved lubricants, can contribute to higher overall efficiency in gear motors.
In summary, gear reduction is significant in gear motors as it provides increased torque, improved control, and better load matching. However, gear reduction can introduce mechanical losses and affect the overall efficiency of the system. Proper design, maintenance, and consideration of application requirements are essential to optimize the balance between torque, speed, and efficiency in gear motors.
How does the gearing mechanism in a gear motor contribute to torque and speed control?
The gearing mechanism in a gear motor plays a crucial role in controlling torque and speed. By utilizing different gear ratios and configurations, the gearing mechanism allows for precise manipulation of these parameters. Here’s a detailed explanation of how the gearing mechanism contributes to torque and speed control in a gear motor:
The gearing mechanism consists of multiple gears with varying sizes, tooth configurations, and arrangements. Each gear in the system engages with another gear, creating a mechanical connection. When the motor rotates, it drives the rotation of the first gear, which then transfers the motion to subsequent gears, ultimately resulting in the output shaft’s rotation.
Torque Control:
The gearing mechanism in a gear motor enables torque control through the principle of mechanical advantage. The gear system utilizes gears with different numbers of teeth, known as gear ratio, to adjust the torque output. When a smaller gear (pinion) engages with a larger gear (gear), the pinion rotates faster than the gear but exerts more force or torque. This results in torque amplification, allowing the gear motor to deliver higher torque at the output shaft while reducing the rotational speed. Conversely, if a larger gear engages with a smaller gear, torque reduction occurs, resulting in higher rotational speed at the output shaft.
By selecting the appropriate gear ratio, the gearing mechanism effectively adjusts the torque output of the gear motor to match the requirements of the application. This torque control capability is essential in applications that demand high torque for heavy lifting or overcoming resistance, as well as applications that require lower torque but higher rotational speed.
Speed Control:
The gearing mechanism also contributes to speed control in a gear motor. The gear ratio determines the relationship between the rotational speed of the input shaft (driven by the motor) and the output shaft. When a gear motor has a higher gear ratio (more teeth on the driven gear compared to the driving gear), it reduces the output speed while increasing the torque. Conversely, a lower gear ratio increases the output speed while reducing the torque.
By choosing the appropriate gear ratio, the gearing mechanism allows for precise speed control in a gear motor. This is particularly useful in applications that require specific speed ranges or variations, such as conveyor systems, robotic movements, or machinery that needs to operate at different speeds for different tasks. The speed control capability of the gearing mechanism enables the gear motor to match the desired speed requirements of the application accurately.
In summary, the gearing mechanism in a gear motor contributes to torque and speed control by utilizing different gear ratios and configurations. It enables torque amplification or reduction, depending on the gear arrangement, allowing the gear motor to deliver the required torque output. Additionally, the gear ratio also determines the relationship between the rotational speed of the input and output shafts, providing precise speed control. These torque and speed control capabilities make gear motors versatile and suitable for a wide range of applications in various industries.
editor by CX 2024-04-15
china Custom Gpg Ik Rk Gdm Worm Electric AC DC Gear Reducer Brushed Brushless Motor 4W-750W for Turnstile Boom Swing Barrier Solar Panel Cleaner manufacturers
Product Description
CZPT gear motor is ideal generate for all kinds of industrial automation merchandise for each industrial and commercial software.
What you can be presented by us is steady quality goods(really and successful overall performance gear motor) and CZPT solution.
The principal items is induction motor, reversible motor, DC brush equipment motor, DC brushless gear motor, CH/CV medium gear motors, Planetary equipment motor,Worm gear motor,Appropriate angle strong and hollow shaft equipment motor, etc, which used commonly in CZPT fields of producing pipelining, transportation, meals, medicine, printing, cloth, packing, business office, apparatus, entertainment and so forth, and is the chosen and matched product for automatic device.
one)The stator is made of high quality minimal carbon metal seamless steel tube and ferrite long term magnet.
2)The rotor consists of silicon metal sheet,copper coil,commutator and insulating substance,etc.
3)The rotor shaft is created of substantial functionality medium carbon alloy metal and processed by specific technics.There are spherical shaft and gear shaft.
4)The bearing and oil seal is selected from well-recognized manufacturer to make certain very good working efficiency and sealing impact.
five)The wire is produced from high temperature resistant and flame retardant substance.
Need to you any questions,remember to really feel free of charge to make contact with Ms Susan Liu.
Make sure you leave message or ship inquiry.I will be back to you asap.
Design Instruction
| Model | Gear Head | Rated CZPT |
Voltage |
Ampere | Pace | Torque | Shell Diameter | Motor Peak |
| W | V | A | r/min | mN.m | mm | 08 | ||
|
GDM08-SC |
4GN | 30 | 12 | 4.six | 1500 | a hundred ninety.9 | Φ69 | 105 |
| 1800 | 159.08 | |||||||
| 2200 | one hundred thirty.2 | |||||||
| 24 | 2.one | 1500 | a hundred ninety.9 | |||||
| 1800 | 159.08 | |||||||
| 2200 | one hundred thirty.two |
| Reduction Ratio | L1 | L2 | L3 |
| 1:3~1:twenty | 105mm | 32mm | 137mm |
| 1:25~1:300 | 105mm | 44mm | 149mm |
FAQ
Q: How about your organization?
A:We are gear motor factory positioned in HangZhou city of CZPT and set up in 1995.we have much more than 1200 workers.Our major product is AC micro equipment motor 6W to 250W, AC little gear motor 100W to 3700W,brush DC motor 10W to 400W,brushless motor 10W to 750W,drum motor 60W to 3700W ,planetary gearbox , and CZPT box,etc.
Q: How to choose a ideal motor?
A:If you have gear motor pictures or drawings to display us, or you explain to us detailed specs like voltage, speed, torque, motor dimension, functioning manner of the motor, required lifetime and noise amount etc, remember to do not hesitate to permit us know, then we can propose suited motor for every your ask for .
Q: Can you make the gear motor with CZPT ize specifications ?
Indeed, we can CZPT ize for every your request for the voltage, pace, torque and shaft size and condition. If you need to have extra wires or cables soldered on the terminal or require to insert connectors, or capacitors or EMC we can make it way too.
Q: What is actually your guide time?
A: Usually our normal regular merchandise will require ten-15days, a bit CZPT er for CZPT ized items. But we are very versatile on the lead time, it will rely on the specific orders.
Q: What is your MOQ?
A: If shipping by sea ,the minimum buy is a hundred parts, if provide by express, there is no limit.
Q: Do you have the item in stock?
A: I am sorry we do not have the item in stock, All goods are created with orders.
Q: How to get in touch with us ?
A: You can send out us enquiry .
Beneath is a checklist of our currently obtainable industrial gearboxes. If you cannot uncover what you are searching for, make sure you get in touch with the manufacturing unit for much more choices. At EP, we are continually developing new goods and retrofitting previous ones to satisfy consumer specifications.
china near me shop Dual Axis Solar Tracker Mounting Ball Bearing Gear Motor manufacturers
Product Description
3″ twin axis slewing generate CZPT velocity reducer slewing bearing equipment motor for little PV photo voltaic tracker
Coresun CZPT ‘s worm-equipment slewing travel includes two classes: cylindrical worms and envelope worms. Cylindrical worms are ideal for medium-speed and hefty-responsibility apps, although envelope worms are ideal for lower-speed, hefty-duty and high-precision applications. The worm-equipment slewing travel is self-locking , In the discipline of CZPT athletics, it can provide simple safety ensure and more simplify the all round layout of the gear. It is a superior industrial accent.
Coresun CZPT ‘s enveloping worm rotary drive is fully derived from its possess technological innovation, the processing engineering is unique, and the processing process is totally numerically managed. Consequently, the solution high quality is incredibly controllable, the manufacturing accuracy is far larger than that of related merchandise, and the functionality of the completed solution is also Far larger than other comparable items. In addition to the last solution, the envelope worm and matching CZPT can be flexibly optimized and configured according to person demands. In accordance to diverse utilization requirements and environments, the Khan CZPT Envelope Worm can be manufactured of a range of materials and can be subjected to CZPT specific warmth treatments to make the item far more durable in conditions of consumer requirements. For discipline environments these kinds of as photo voltaic and wind strength programs that call for CZPT -expression servicing-free procedure, this kind of rotary push solution is the best decision.
Organization Introduction
1. Introduction: we are a manufacturer of slewing generate CZPT manufacturing facility occupies an region of 30000 sq. meters with 4 workshop and 1 office creating.
two. Showcased merchandise: slewing bearing and slewing travel
3. Money: Current is 1 million RMB, but we are rising the funds to ten million RMB
4. Personnel: forty
five. Certificate: ISO9001, 3.1 certificate, CCS certification, CZPT and CZPT nology Development Award
six. Annual Exportation: 8million USD
seven. Exported nations around the world: (39)
Asia: India, Pakistan, Iran, Signore, Ga, Malaysia, Vietnam, Thailand, Philippines, Israel, Korea, UAE, Sri Lanka, Saudi Arabia,
Europe: Turkey, Russia, Spain, Czech Republic, CZPT , Poland, Slovakia, Bosnia and Herzegovina, Austria, France, Germany, Switzerland, Finland, Ukraine, British isles
The united states: USA, Canada, Mexico, Brazil, Puerto Rico, Peru, Chile
Africa: South Africa, Egypt
Oceania: Australia
|
Model |
SVH3 |
Spot of Origin |
HangZhou,China |
|
Brand |
Coresun CZPT |
Sort |
Dual Axis |
|
IP Course |
IP65 |
Output Torque |
716N.m |
|
Tilting Moment Torque |
1100N.m |
Holding Torque |
2000N.m |
|
Mounting Bolts |
M10 |
Color |
Gray or Purple |
|
Equipment Ratio |
sixty two:one |
Efficiency |
40% |
three” Slewing CZPT Production Photograph
Coresun CZPT procedures the Slewing CZPT CZPT metallographic testing to ensure the high quality of raw materials and helps make the salt &spray tests to make confident the anti-corrosionperformance.
Make contact with US
It is sincerely searching forward to cooperating with you for and delivering you the best high quality solution & service with all of CZPT coronary heart!
Appropriate angle gearboxes (worm and planetary gears) are sturdy and can be employed for 90° turns. An inline reducer (parallel shaft and planetary) is an perfect matching motor with large input speeds, or when gear motor performance is important. Contact our technical income employees to assist figure out which transmission resolution is best for you.
china sales 12V 24V Worm Solar Panel Electric with Planetary Gearbox Brushless DC Geared Motor manufacturers
Product Description
TaiBang CZPT Market CZPT Co., Ltd.
The primary merchandise is induction motor, reversible motor, DC brush gear motor, DC brushless gear motor, CH/CV large gear motors, Planetary equipment motor ,Worm gear motor etc, which used broadly in CZPT fields of manufacturing pipelining, transportation, food, medication, printing, material, packing, workplace, equipment, leisure and many others, and is the favored and matched item for automatic machine.
Motor Design Instruction
G2BLD10-24GN-18S
| G | 2 | BLD | ten | 24 | GN | 18S |
| Factory Code | Body Size | Motor Sort | Output CZPT | Electrical power Voltage | Motor Shaft Type | Motor CZPT |
| GPG | Motor Mounting Flange: 60mm,70mm,80mm, 90mm,100mm,ø45,ø60 |
BLD:Brushless CZPT With Sq. Gearhead
BLDP:Brushless CZPT With Planetary Gearhead |
10:10W 15:15W twenty five:25W 40:40W 60:60W ninety:90W 200:200W four hundred:400W |
24:DC24V 36:DC36V 48:DC48V one hundred ten:DC110V 220:DC220V |
GN:Basic Bevel Gear
GU:Reinforced Bevel Equipment A1:Milling Keyway A:Flat sort |
15S:1500RPM 18S:1800RPM 25S:2500RPM 30S:3000RPM |
Motor Efficiency Parameter
| Model | Voltage | Rated CZPT | No-load Parameter | Load Parameter | Motor Lifestyle (Several hours) |
Motor CZPT ght(kg) | |||
| Rotation CZPT | Present(A) | Rotation CZPT | Torque(N.m) | Current(A) | |||||
| G2BLD15-24 | 24V | 15W | 2200RPM | Max .3 | 1800RPM | .05 | one.1 | >5000 | 0.forty five |
| G2BLD15-36 | 36V | 2100RPM | Max .two | 1800RPM | .05 | .7 | |||
| G2BLD15-forty eight | 48V | 2100RPM | Max .1 | 1800RPM | .05 | .five | |||
| G2BLD25-24 | 24V | 25W | 3300RPM | Max .four | 3000RPM | .08 | one.three | 0.sixty five | |
| G2BLD25-36 | 36V | 3200RPM | Max .3 | 3000RPM | .08 | .nine | |||
| G2BLD25-forty eight | 48V | 3200RPM | Max .two | 3000RPM | .08 | .seven | |||
Gearboxes and reducers are enclosed mechanical reduction devices frequently employed in present-day automatic management techniques to command torque from your motors and accomplish other motion-connected responsibilities. A gearbox enables you to boost torque while decreasing the velocity of your key mover output shaft. The output shaft of the gearbox rotates at a slower pace than the input shaft. This generates a mechanical edge, rising torque. Conversely, your gearbox can be set in reverse, providing elevated shaft speed and lowered torque. Two widespread transmission configurations are straight and correct angle. On-line designs usually consist of helical or spur gears, planetary gears, cycloidal mechanisms, or harmonic generators. Proper-angle designs normally use worm or helical gear drives, however, hybrid drives are also accessible. Gearmotors mix an enclosed equipment established with an electric motor to enhance torque and functionality while lowering velocity. Although added friction, inertia, or sharp load adjustments for short-phrase procedure of the actuator can lead to issues, they give a extended operating life by stopping overloading. A variety of gear ratios, speeds and torques are available to support optimize overall performance and lessen likely problems. Search to uncover the appropriate gearbox and reducer for your automation undertaking.
china shop Solar Tracker Slewing Drive Gear Motor manufacturers
Solution Description
SC9 SE9 solitary axis slew drives gear motor solar panels photo voltaic tracker program
|
Model |
SC9 |
IP |
IP65 |
|
Model |
Coresun CZPT |
Offered Load CZPT ght |
500-800kg |
|
IP Course |
IP65 |
Output Torque |
854N.m |
|
Tilting Moment Torque |
33.9KN.m |
Holding Torque |
38.7KN.m |
|
Mounting Bolts |
M16 |
Electrial CZPT |
24VDC |
|
Gear Ratio |
sixty one:1 |
Efficiency |
forty% |
Coresun CZPT Equipment HangZhou Co., Ltd. Slewing drives purpose with regular worm technological innovation, in which the worm on the horizontal shaft acts as the driver for the equipment. The rotation of the horizontal screw turns a equipment about an axis perpendicular to the screw axis. This blend decreases the velocity of the driven member and also multiplies its torque rising it proportionally as the velocity decreases. The speed ratio of shafts depends on the relation of the amount of threads on the worm to the number of tooth in the worm wheel or equipment.
Coresun CZPT SC sequence of merchandise are processed by double lip rotation framework oil sealing. The grease gets a secure liquid film when running, which not only decreases the corrosion rate and shaft friction in the procedure of procedure, but also increases the defense grade to IP65. SC has the efficiency of self eccentric operate and increased tracking precision.
SC series adopts much better worm and bearing method, which can maintain axial and radial hundreds at the exact same time and make certain the secure transmission of worm and gear.
SC slewing generate is machined by unique floor remedy method of electrophoresis and portray. All-about Anti-Rust and Anti-corrosion make certain SC is a great resolution to strict working condition.
Enclosed slewing drives are the most well-liked product of Titanhorse’ slewing drives and can help CZPT movement in equipment this sort of as wind turbines, armed forces tools, digger derricks, solar trackers, health care tools, forestry, waste administration and industrial positioners. The housing fully encapsulates all the generate factors this kind of as the double enveloping CZPT set, planetary gearing, and turntable bearing, these kinds of that they have complete protection from the factors. The Enclosed CZPT is also beneficial if you happen to be mounting inside of so as not to see the components in movement, or to keep away from injuring employees working in near proximity.
Slewing drives are best for jobs that call for equally load-holding and rotational torque from the very same gearbox. The fully-enclosed arrives with Titahorse’ patented hourglass worm engineering, or cone drives and double enveloping CZPT sets exactly where essential, for greatest load-keeping and effectiveness. Every size is rigorously tested for dependable overall performance, with base product sizes making 6kNm to 2200kNm of holding torque, 200Nm to 630kNm of output torque, 500Nm to 2710kNm of overturning moment load capability, and gearbox reduction ratios of 30:1 up to 156,600:1.
1. We commit CZPT selves to the R &D of CZPT ized slewing bearing with high precision,special function and specifications.
2. With abundant raw resources and substantial creation performance, the firm can offer products to CZPT ers as swiftly as possible and shorten the time for CZPT ers to wait around for goods.
3. Our inside quality manage consists of very first inspection, mutual inspection, in-procedure top quality control and sampling inspection to make certain merchandise good quality. The organization has full tests equipment and CZPT d screening approach.
four. Strong following-sales service group, well timed fix CZPT er troubles, to give CZPT ers with a variety of solutions.
Our Services & CZPT
one.Uncooked material from reputable suppliers
2.Generation method is in rigorous accordance with ISO9001 Good quality Management System .
three.Stringent in-procedure good quality manage and a hundred% completed merchandise inspection ahead of delivery
4.3rd party product inspections are acceptable on CZPT er request.
five.Adoption of standardized merchandise style procedure and APQP, PPAP, FEMA for software investigation
Coresun CZPT Slewing CZPT CZPT Manufacturing Image and Software
Coresun CZPT procedures the metallography detection to check the content and organization composition of worm shaft,slewing gear and casting housing.
Coresun CZPT slewing drive equipment motor with 24VDC motor is certificated by CE
Get in touch with US
It is sincerely hunting ahead to cooperating with you for and supplying you the ideal good quality item & support with all of CZPT coronary heart!
Gearboxes can be utilised in a variety of fields of extensive processing, agriculture, chemical processing, oil and fuel, electricity transmission and distribution systems, logistics, warehousing and other industries. Gear reducers are usually used the place greater torque and/or reduced rotational speeds are necessary, or if electrical power demands to be transmitted at alternating angles, this sort of as in proper-angle motors. It can also alter the path of rotation, as properly as clockwise and counterclockwise. EP gives a complete range of gear reducers with appropriate angle worms and substantial performance alternatives. Electrical Equipment Aluminum goods are a light-weight and sturdy substitute to today’s forged iron and metal models and can be stocked or customized made to your precise specifications. EP gearboxes are light-weight and durable, aluminum worm gearboxes are created for tight areas, including challenging-to-install OEM styles as effectively as cell gear. Eccentric reducers are accessible as compact aluminum or solid iron inline reducers with seal lifestyle rankings from 15HP (aluminum) to 40HP (forged iron). In addition to our normal and modified common merchandise, our engineers will work with you to style and create custom remedies for several drive systems to fit your software wants.
china near me shop Best 24V DC Motor Solar Motorized Jack Mechanical Motorised Screw Jack France Client manufacturers
Merchandise Description
CZPT manufactures and revenue ideal 24v dc motor photo voltaic motorized jack, mechanical motorised screw jack for France consumers. CZPT y scissor elevate table with one 24v dc motor photo voltaic motorized jack. The customer has not AC voltage at their functioning area, must need the dc electrical battery as CZPT offer. The 24v dc motor solar motorized jack framework consist of a clevis conclude 5ton worm screw jack with motor flange, a dc 24v motor, a dc motor electrical controller and a planetary gear reducer. CZPT manufactured 24v dc motor photo voltaic motorized jack is CZPT , such as various load capacities, screw design, vacation length, journey velocity, mounting type and electrical motor sorts and so forth.
Packing Pictures & Shipping
Transport:
one. CZPT freight: seaport to seaport, cost terms CIF, FOB, EXW, CFR and so forth.
two. Air freight: airport to airport, cost terms EXW, CRF and so on.
three. Air Categorical: DHL, FEDEX, UPS, TNT.
Packaging:
Robust Exporting Plywood Instances (Worldwide Exporting Common CZPT Substance with Totally free Fumigation)
Our Advantages
1. CZPT standard supplies for All CZPT manufacturer products. We insist on deciding on brand suppliers to offer the high high quality raw supplies to control the producing approach. Optimization continually the manufacturing processes, inspecting in each and every link and taking care of production website.
two. a hundred% quality confident with double quality inspections. The top quality inspection by high quality inspectors from processing to concluded items as the first time. Ahead of packing, the corresponding revenue engineers should examine the orders following the paper drawings, purchase quantities and special markings in the invoice or revenue contracts as the CZPT time.
three. 100% protection transportation. Packing with powerful common export plywood situations components (free fumigation), inner packing with epe foams to stop products swaying and outer packing with iron sheets and CZPT eners to CZPT en the offers.
four. Internationl revenue engineers have expert understanding and expertise on CZPT regular goods and services. They have enough capacity to fix the basic technical problem right away whatsoever by mobile phone, online chat, confront to encounter communications.
five. All the standard products with 2d CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Types (Phase, STP, Design, IGS, PRT and CATParT formats).
6. CZPT design and style CZPT , CZPT services CZPT , Free CZPT guidance, Free of charge prices CZPT and CZPT er label CZPT .
seven. Inspection equipments consist of motor with inverter drive program, height adjustmemt motorized lifting program, coordinate measuring machines, outside the house micrometers, inside micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, electronic sound meters, industrial infrared thermometers, electronic speed measuring instruments, electronic multimeters, and large precision clamp digital ammeter and so forth.
8. Processing with present day CZPT d devices these kinds of as CNC equipment hobbing machines, CNC flank grinding devices, CNC cylindrical grinding machines, multi-axis CNC milling equipment, CNC lathes and others equipments.
Finished Tasks
1. Theatrical options stage and orchestra system lifts projects. CZPT ers are from France, Australia, Netherlands, CZPT CZPT dom, Spain and Canada.
two. CZPT electric CZPT station assignments and water conservancy assignments. CZPT ers are from Vietnam, Australia, Malaysia, Russian Federation, Nepal, Pakistan, Belgium, CZPT States and CZPT CZPT dom.
three. Aircraft routine maintenance platforms and docking methods tasks. CZPT ers are from Pakistan, Singapore and CZPT Arab Emirates.
four. Solar panel tracking program assignments. CZPT ers are from Spain, India and Canada.
5. Bolted metal storage tanks and silos lifting options. CZPT ers are from South Africa, CZPT States, Mexico, Russian Federation, Brazil and Vietnam.
6. Dish antenna elevation and azimuth positioning assignments. CZPT ers are from Singapore, Malaysia and CZPT States.
seven. Railway wagon projects. CZPT ers are from South Africa.
8. Beverage can manufacturing traces. CZPT ers are from Netherlands, CZPT States, Thailand and Indonesia.
9. Metal factories generation traces. CZPT ers are from Iran, CZPT States and Turkey.
ten. Steady PU sandwich panel manufacturing traces. CZPT ers are from Thailand and CZPT CZPT dom.
Our Items Record
1. Handbook screw jacks, CZPT ctric screw jacks.
2. CZPT Jacks Collection: JT sequence acme screw jacks, JTC collection cubic screw jacks, JTW series device screw jacks, JTM sequence worm screw jacks, JTB sequence ball screw jacks, JTD sequence cubic ball screw jacks, JSS collection stainless metal screw jacks, JTS series bevel gear screw jacks, CZPT -common collection screw jacks.
3. Bevel Gearboxes Collection: JT collection bevel gearboxes, JTP collection cubic bevel gearboxes, JTA collection aluminum bevel gearboxes.
4. CZPT ing Techniques and Methods Components: two-jacks programs, three-jacks programs, 4-jacks methods, six-jacks programs, eight-jacks techniques.. Accessories go over couplings, CZPT joints, cardan shafts, connecting shafts, electric motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod conclude bearings, stop nuts, restrict switches, basic safety nut, vacation nuts, linear shafts and bearings, linear guides and bearings, telescopic spring covers, bellows boot, protective tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and situation indicators etc.
five. CZPT Actuators Series: Parallel linear actuators with 3-phase AC motors, Inline linear actuators with 3-period AC motors,
6. Gearmotors and Reducers Collection: CZPT cal gearmotors R series, CZPT cal bevel gearmotors K series, parallel shaft CZPT cal gearmotors F series, CZPT cal CZPT motors S series, small AC gear motor series and CZPT motor reducer collection.
Our CZPT ers’ Nations
1. CZPT ican International locations: CZPT States, Mexico, Canada, Chile, Xihu (West CZPT ) Dis.via, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
2. CZPT pean Nations around the world: Russia, Germany, Turkey, France, CZPT CZPT dom, CZPT , Spain, Ukraine, Poland, CZPT ia, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Eire, Croatia, Georgia, Armenia, CZPT uania, Slovenia, Estonia, Cyprus, Luxembourg, CZPT land.
3. Asian Nations: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, CZPT Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
4. CZPT ian International locations: Australia, New Zealand, Fiji.
5. African Nations: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania.
Contact Data
HangZhou CZPT Business Co.,Ltd (VAT No.: 9144190007026567X3, registered Funds 500000CNY) is a leading producer and supplier in CZPT for screw jacks (mechanical actuators), bevel gearboxes, lifting techniques, linear actuators, gearmotors and speed reducers, and other folks linear motion and CZPT transmission merchandise. We are Alibaba, Created-In-China and SGS (Serial NO.: QIP-ASI192186) audited maker and supplier. We also have a strict quality program, with senior engineers, knowledgeable experienced staff and practiced income teams, we regularly offer the high high quality equipments to meet up with the CZPT ers electro-mechanical actuation, lifting and positioning needs. CZPT Business ensures quality, reliability, performance and value for present day demanding industrial programs.
Internet site 1: http://screw-jacks.en.made-in-china.com
Website 2: https://screw-jacks.en.manufactured-in-china.com
Gearboxes can be utilized in a variety of fields of comprehensive processing, agriculture, chemical processing, oil and fuel, electricity transmission and distribution techniques, logistics, warehousing and other industries. Equipment reducers are normally utilised in which greater torque and/or reduced rotational speeds are needed, or if power requirements to be transmitted at alternating angles, this kind of as in proper-angle motors. It can also change the path of rotation, as nicely as clockwise and counterclockwise. EP offers a total range of equipment reducers with correct angle worms and higher performance choices. Electric Gear Aluminum items are a lightweight and durable option to today’s solid iron and metal designs and can be stocked or custom made produced to your exact requirements. EP gearboxes are lightweight and tough, aluminum worm gearboxes are developed for tight areas, like hard-to-set up OEM styles as nicely as cell products. Eccentric reducers are accessible as compact aluminum or solid iron inline reducers with seal lifestyle scores from 15HP (aluminum) to 40HP (cast iron). In addition to our normal and modified normal products, our engineers will work with you to design and build personalized solutions for multiple drive technologies to match your application requirements.
china sales Solar Tracker Slewing Drive Gear Motor manufacturers
Solution Description
Coresun CZPT SC9 slewing generate equipment motor CZPT for 18-32 square meter photo voltaic tracker method.
Slewing travel motor for single and dual axis photo voltaic plant,PV and CSP system.
solar tracker generator motor is CZPT ized can choose 12V,24V,48V,220V380V motor push.
|
Model |
SC9 |
IP |
IP65 |
|
Manufacturer |
Coresun CZPT |
Obtainable Load CZPT ght |
500-800kg |
|
IP Class |
IP65 |
Output Torque |
854N.m |
|
Tilting Moment Torque |
33.9KN.m |
Holding Torque |
38.7KN.m |
|
Mounting Bolts |
M16 |
Electrial CZPT |
24VDC |
|
Equipment Ratio |
61:1 |
Efficiency |
40% |
Coresun CZPT Gear HangZhou Co., Ltd. Slewing drives purpose with regular worm engineering, in which the worm on the horizontal shaft functions as the driver for the equipment. The rotation of the horizontal screw turns a gear about an axis perpendicular to the screw axis. This combination minimizes the speed of the pushed member and also multiplies its torque escalating it proportionally as the speed decreases. The pace ratio of shafts is dependent on the relation of the number of threads on the worm to the number of enamel in the worm wheel or equipment.
Why Select Us:
Photo voltaic CZPT ostat monitoring technique is a mechanical and digital manage unit system which optimizes the use of daylight to increase photoelectric conversion effectiveness in the process of photothermal and photovoltaic CZPT era. It primarily contains photovoltaic programs and photothermal purposes.
1. Our producing normal is in accordance to machinery normal JB/T2300-2011, we also has been found the productive Top quality Administration Methods(QMS) of ISO 9001:2015 and GB/T19001-2008.
2. We dedicate CZPT selves to the R &D of CZPT ized slewing bearing with high precision,particular objective and requirements.
3. With considerable uncooked components and high production performance, the firm can supply products to CZPT ers as swiftly as feasible and shorten the time for CZPT ers to wait for items.
four. Our inner quality management contains very first inspection, mutual inspection, in-procedure good quality control and sampling inspection to make certain item top quality. The business has full screening products and CZPT d screening approach.
5. Strong following-product sales provider staff, timely solve CZPT er difficulties, to provide CZPT ers with a range of providers.
six. Delivery Time: 7 days following
seven. Warranty Time: 5 many years
8. ISO and CE certification for quality ensure
Our Companies & CZPT
one.Raw substance from trustworthy suppliers
two.Generation procedure is in strict accordance with ISO9001 Top quality Management Program .
3.Rigorous in-process good quality manage and one hundred% finished product inspection just before delivery
4.3rd party product inspections are acceptable on CZPT er ask for.
five.Adoption of standardized merchandise style procedure and APQP, PPAP, FEMA for application analysis
Coresun CZPT Slewing CZPT CZPT Manufacturing Photograph and Software
Coresun CZPT processes the metallography detection to verify the materials and organization construction of worm shaft,slewing equipment and casting housing.
Coresun CZPT testing studies for slewing bearing,worm shaft and completed slewing generate
Coresun CZPT slewing generate gear motor with 24VDC motor is certificated by CE
Get in touch with US
It is sincerely hunting forward to cooperating with you and providing the best quality item & provider with all of CZPT heart!
Gearboxes and reducers are enclosed mechanical reduction gadgets frequently employed in modern automatic handle methods to command torque from your motors and achieve other movement-associated jobs. A gearbox permits you to boost torque while reducing the pace of your prime mover output shaft. The output shaft of the gearbox rotates at a slower speed than the input shaft. This results in a mechanical benefit, increasing torque. Conversely, your gearbox can be established in reverse, providing elevated shaft pace and reduced torque. Two typical transmission configurations are straight and appropriate angle. On-line types normally consist of helical or spur gears, planetary gears, cycloidal mechanisms, or harmonic generators. Appropriate-angle patterns typically use worm or helical equipment drives, even so, hybrid drives are also available. Gearmotors merge an enclosed gear set with an electric powered motor to increase torque and performance although minimizing pace. While further friction, inertia, or sharp load changes for quick-phrase operation of the actuator can trigger issues, they supply a prolonged functioning lifestyle by protecting against overloading. Various gear ratios, speeds and torques are available to support improve overall performance and lessen likely troubles. Search to locate the correct gearbox and reducer for your automation venture.
china near me shop Sc3 Solar Mount Worm Gear Slewing Drive Motor manufacturers
Merchandise Description
SC3 slewing generate CZPT can mount 12V, 24V, 220V, 380V motor as CZPT er’s requirement.
For photo voltaic tracker technique 2-4pcs solar panels design and style
SC goods are made for ring floor CZPT and CZPT . The worm adopts deep nitriding treatment method, which not only guarantees adequate hardness, but also provides abrasion resistance and corrosion resistance.
|
Product |
SC3 |
Making use of Daily life |
25 years |
|
Model |
Coresun CZPT |
Accessible Load CZPT ght |
50-200kg |
|
IP Course |
IP65 |
Output Torque |
818N.m |
|
Tilting Instant Torque |
1KN.m |
Keeping Torque |
2KN.m |
|
Mounting Bolts |
M10 |
Electrial CZPT |
24VDC |
|
Gear Ratio |
sixty two:1 |
Performance |
40% |
Coresun CZPT Products HangZhou Co., Ltd. Slewing drives operate with regular worm technologies, in which the worm on the horizontal shaft acts as the driver for the gear. The rotation of the horizontal screw turns a equipment about an axis perpendicular to the screw axis. This mix minimizes the pace of the driven member and also multiplies its torque escalating it proportionally as the velocity decreases. The velocity ratio of shafts depends on the relation of the quantity of threads on the worm to the variety of tooth in the worm wheel or equipment.
Solar CZPT ostat tracking system is a mechanical and electronic handle device system which optimizes the use of daylight to improve photoelectric conversion efficiency in the approach of photothermal and photovoltaic CZPT generation. It primarily involves photovoltaic programs and photothermal programs.
Slewing rings are 1 of the most essential parts of cranes. The slewing ring supplies the crane with its possibility to rotate although lifting loads. CZPT ly, slew ring has to be in excellent condition for the crane to totally function.
We can also manufacture the CZPT -normal slewing bearings in accordance to CZPT er’s requirments.
In get to assist discover your slewing ring, we advise the subsequent:
1. Offer the equipment product on which the bearing suits.
2. Give a quick drawing offering with the following proportions famous as properly as achievable.
Internal ring and outer ring diameters – Internal and outer flange diameters and heights
The height of the internal ring, outer ring and whole assembled peak
The PCD of mounting holes in the interior and outer rings. Also be aware hole dimensions, through or blind and or taped – Gear depth including variety of teeth, approx tooth pitch, tooth top and depth + profile if attainable
Coresun CZPT Slewing CZPT CZPT Generation Photo and Application
Coresun CZPT processes the metallography detection to examine the materials and organization construction of worm shaft,slewing gear and casting housing.
Coresun CZPT slewing push gear motor with 24VDC,220VAC, 380VAC motor is certificated by CE
Make contact with US
It is sincerely hunting ahead to cooperating with you for and supplying you the very best top quality merchandise & support with all of CZPT heart!
When looking at a reducer vs a gearbox, often the only big difference is terminology. This is since all reducers are gearboxes. Nonetheless, not all gearboxes are retarders. This might seem difficult, but it really is in fact very straightforward. A reducer is a equipment established between the motor and the device. The function of the reducer is to lessen the rotational velocity transferred between these two endpoints. The reducer amplifies and multiplies the torque (enter) made by the motor. 2nd, a reducer, as the identify implies, reduces the velocity of the enter (output in rpm) so that the output is the proper pace. The phrase “gearbox” is just a generic term employed for the equipment prepare in between the motor and the machine. As a result, all reducers are gearboxes. Nonetheless, not all gearboxes decrease input speed. Even though unusual, gearboxes can really increase enter speeds. By significantly the most widespread variety of gearbox is a retarder, but it would be incorrect to say that all gearboxes are retarders.