30W DC Worm Gear Proper Angle Brush Gear Motor
Item Description:
Gear Motor-Torque Table Allowance Torque Device:Upside (N.m)/Belowside (kgf.cm)
•Gearhead and Intermediate gearhead are offered separately.
•Enter the reduction ratio into the blank() inside of the model identify.
•The velocity is calculated by dividing the motor’s synchronous pace by the reduction ratio. The real speed is 2%~twenty% considerably less than the shown price, relying on the dimension of the load.
•To reduce the pace outside of the reduction ratio in the subsequent table, attach an intermediate gearhead (reduction ratio: ten) amongst the reducer and motor. In that situation, the permissible torque is 8N-m.
|
Sort Motor/Gearhead |
Equipment Ratio |
3 |
three.6 |
5 |
6 |
seven.five |
nine |
12.five |
fifteen |
eighteen |
25 |
thirty |
36 |
fifty |
60 |
seventy five |
90 |
one hundred |
120 |
one hundred fifty |
one hundred eighty |
|
Pace r/min |
950 |
791 |
570 |
475 |
380 |
316 |
228 |
190 |
158 |
114 |
95 |
79 |
fifty seven |
forty seven |
38 |
31 |
28 |
23 |
19 |
15 |
|
| Z3D30-24GN(3GN3K) |
4GN()RC/ 4GN()RT |
.16 |
.20 |
.27 |
.33 |
.46 |
.fifty five |
.76 |
.92 |
one.10 |
one.53 |
one.80 |
2.20 |
3.05 |
3.thirty |
4.12 |
4.95 |
5.fifty |
6.sixty |
eight.00 |
8.00 |
|
1.63 |
two.04 |
two.seventy five |
3.37 |
one.69 |
5.sixty one |
7.75 |
9.38 |
11.2 |
15.six |
18.4 |
22.four |
31.one |
33.seven |
42. |
fifty.five |
56.1 |
67.3 |
eighty. |
80.00 |
Dimensions(Device:mm):
Firm Info
FAQ
Q: What’re your main products?
A: We at the moment create Brushed Dc Motors, Brushed Dc Equipment Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Equipment Box and so on. You can examine the specs for previously mentioned motors on our site and you can e-mail us to recommend necessary motors for every your specification also.
Q: How to pick a suitable motor?
A:If you have motor photos or drawings to display us, or you have comprehensive specs like voltage, pace, torque, motor dimension, working manner of the motor, required life time and noise amount etc, you should do not be reluctant to allow us know, then we can recommend appropriate motor for each your ask for accordingly.
Q: Do you have a CZPT provider for your common motors?
A: Of course, we can personalize for every your request for the voltage, velocity, torque and shaft dimension/condition. If you need added wires/cables soldered on the terminal or need to have to add connectors, or capacitors or EMC we can make it as well.
Q: Do you have an personal style support for motors?
A: Indeed, we would like to style motors independently for our consumers, but it may possibly want some mildew building price and design cost.
Q: What is actually your direct time?
A: CZPTly speaking, our regular common solution will require 15-30days, a bit for a longer time for CZPT products. But we are extremely adaptable on the lead time, it will rely on the distinct orders.
Make sure you contact us if you have thorough requests, thank you !
