DC Motor Mechanical Electronic System
57IC09/57IC22/57IC30 Characteristics
one.Running voltage: DC enter voltage 15VDC to 50VDC,recommend operating voltage 36V
two.The max continuous output existing is 8.2A, the max peak present is 13A (advanced overload capacity of phase servo)
three.Using FOC magnetic positioning handle technological innovation and place vector pulse width modulation (SVPWM) shut-loop handle engineering
4.Making use of sophisticated variable existing technological innovation and frequency conversion technology, successfully lowering heat and vibration of motor and driver
5.The amount of pulses for every cycle (subdivision) can be established by the debug computer software or the dial switch setting,the max subdivision no.is 51200.
six.The max pulse frequency of handle instruction is 500KHz (manufacturing unit default is 200KHz)
seven.Pulse, direction and allow signal input interface degree is 4.five to 28V compatible
eight.Functionality: sleek speed, small overshoot ,excellent output power in medium and high speed, modest monitoring mistake, reduced warmth of motor and driver
Driver Model And Variety Xihu (West Lake) Dis.
| Motor Type | 57IC09 | 57IC22 | 57IC30 | 5731C10 | 5731C15 | |
| Holding Torque | 1.0N•M | two.2N•M | three.0N•M | one.0N•M | 1.5N•M | |
| Vector Maximum Current | 6A | 6A | 8.0A | 5.6A | 5.6A | |
| Drive Control Scheme | Pure vector FOC control scheme, quick start and stop point(PM) control scheme, power angle control scheme |
|||||
| Step Angle / Motor Pole Pairs | 1.8°/50 pairs pole | 1.2°/50 pairs pole | ||||
| CZPTmmended application | Operation smooth in low-speed, and output strength is good in high-velocity, low temperature rise, small vibration, excellent anti-interference ability and EMC effect |
|||||
| Operation voltage | fifteen-50Vdc,36Vdc recommend | |||||
| Overvoltage Protection Voltage | 68Vdc±2 | |||||
| Voltage control method | 32 bits DSP Vector closed – loop control technology | |||||
| Pulse Limit Frequency | 200KHz | |||||
| Protection | Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm | |||||
| Input Signal | Pulse, direction and enable differential / single-ended interface signal, interface level 4.5-28Vdc compatible, no need external current limiting resistor |
|||||
| Output Signal | Alarm / in-position signal OC output, the output capacity is100mA, need external pull-up resistor, the maximum pull up voltage is 24Vdc |
|||||
| Position Error Control Accuracy | ±1 Pulse | |||||
| Subdivision No. | Default 1600 / rev, through the DIP switch or debug software setting subdivision (two hundred-51200) |
|||||
Dialing Switch Configurations
| Pulse/Rev. | SW1 | SW2 | SW3 | SW4 |
| Default | ON | ON | ON | ON |
| 800 | OFF | ON | ON | ON |
| 1600 | ON | OFF | ON | ON |
| 3200 | OFF | OFF | ON | ON |
| 6400 | ON | ON | OFF | ON |
| 12800 | OFF | ON | OFF | ON |
| 25600 | ON | OFF | OFF | ON |
| 51200 | OFF | OFF | OFF | ON |
| 1000 | ON | ON | ON | OFF |
| 2000 | OFF | ON | ON | OFF |
| 4000 | ON | OFF | ON | OFF |
| 5000 | OFF | OFF | ON | OFF |
| 8000 | ON | ON | OFF | OFF |
| 10000 | OFF | ON | OFF | OFF |
| 20000 | ON | OFF | OFF | OFF |
| 40000 | OFF | OFF | OFF | OFF |
Be aware : All previously mentioned is normally used, and we can customise in accordance to your request or pick the suitable design for you, you should tell us pursuing parameters: recent, voltage, keeping torque, physique duration,the application spot.
Application
Suited for all kinds of tiny and medium-sized automation equipments and instruments. This sort of as: laser gear, medical gear, 3D printer, small and medium-sized engraving machine, digital processing products, automated crawling tools, specific CNC device resource, packaging tools and robotic. It is particularly helpful for end users who expect minimal noise and substantial velocity applications.
Packaging and shipping
one.Outer packing: CZPT export carton with essential delivery marks
two.Inner packing: Water-proof packing with shock absorbing EPE and cardboard surrounded
3.As per the clients needs
Our support
1.Functioning time : eight:00 a.m – ten:00 p.m .Any concerns, please notify us freely, we will be reply you asap.
two.Direct time : For samples, two to 5 times will be Alright. For mass manufacturing, the guide time count on the portions you want.
three.Warrantity time period : 18 months and Life-lengthy routine maintenance services for the solution.
four.We settle for products customise.
FAQ
Q1: How to select the suited stepper or servo motor?
A1: There are serveral crucial things: dimension, size, holding torque, voltage, existing and many others.Soon after validate them and told us, we can decide on the suitable a single for you.
Q2: Any other approaches to finalize the design?
A2: Positive, you can deliver us the model you are making use of, we can help you find the appropriate one particular.
Q3:How to promise the Quality of CZPT Components?
A3: We have the built-in program for industrial parts high quality control. We have IQC (incoming quality control), IPQCS (in procedure quality handle segment), FQC (closing good quality manage) and OQC (out-going quality manage) to manage each approach of industrial elements prodution.
Q4:What is the Edge of Your Areas for Industry Goods?
A4:1.The benefit of our goods is the competitive charges, quick shipping and higher top quality. Our
personnel are responsible-oriented, friendly-oriented,and diligent-oriented. Our items are showcased by strict tolerance, smooth end and prolonged services time.
2.Before we deliver out the items,we check them more than a few moments.
Make contact with
